Fan Coils
Venkon XL
Fan coils, recirculating air. Heating, cooling, for raised external pressure.
Overview
We look at the environmental impact of our products over the entire life cycle – “cradle to cradle”! This results in Environmental Product Declarations (EPD). EPDs can be easily submitted for all common building sustainability certification systems, such as DGNB, BREEAM or LEED, and are available in the Download area. In addition, the product is registered in the building products platform DGNB Navigator.
Many customer requests can be factory-fitted, thanks to an extensive range of accessories. Fitted valve kits, mounted and wired condensate pumps or silencers are just a fraction of what is possible.
This fan coil guarantees XL outputs – even with high air-side pressure loss requirements. The EC fans used can be continuously variably controlled by a 0-10 V DC signal.
You have the choice of four models for each application and building of any kind that needs to be cooled and/or heated.
Simple maintenance is guaranteed by the removable condensate tray and freely accessible accessories (valves, actuators and filters).
The Venkon XL fan coil is ideal for installation in suspended ceilings on account of its slimline design. It can be flexible combined with a connection unit for circular ducts to route treated air to targeted ventilation terminal components.
Heat Pump Ready
This product is suitable for use with a heat pump or other low temperature system. Reduce your energy requirements, operating costs and emissions with our Heat Pump ready range of products. And make you and your customers less dependent on fossil fuels.
We have appropriate heat pump solutions for many applications, from industrial sheds, office buildings, hotels to private homes.
→ Discover more
The unit is easy to clean and the entire design is certified to VDI 6022. As standard, the Venkon XL is equipped with ePM10>50% (M5) / MERV 8 filters or ePM1>50% (F7) / MERV 13.
The generously dimensioned heat exchanger ensures the highest possible output.
The unit can either be suspended from the ceiling on threaded rods or attached to the concrete ceiling with rubber washers to decouple the sound.
The condensate tray continues as far as the heat exchanger connection area to collect any condensate produced. Fully coated, insulated and designed for ease of cleaning. Separate condensate trays are available for the valves.
Water and electricity connections are routed out of the unit at opposite ends for a simple and freely accessible connection.
- The Venkon XL fan coil is equipped with electromechanical control as standard, with optional KaControl.
- The optional modbus interface allows units with KaControl configuration to be networked into systems individually or into groups with factory-programmed higher-level Kampmann system controllers.
Optionally available separately or fitted and wired on the basic unit.
Downloads
Declarations/Certificates
Certificate ISO 50001:2018
PDF
(194 kB)
Certificate ISO 9001:2008
PDF
(118 kB)
EPD Venkon XL size 4
PDF
(895 kB)
EPD Venkon XL size 3
PDF
(864 kB)
EPD Venkon XL size 2
PDF
(896 kB)
EPD Venkon XL size 1
PDF
(898 kB)
UKCA Declaration Venkon XL
PDF
(435 kB)
EU Declaration of Conformity Venkon XL fan coils (FCU)
PDF
(457 kB)
Cross-product information
Products
PDF
(10.7 MB)
Technical catalogues
KaControl MC - Multi Connect
PDF
(2.2 MB)
Manuals
KaControl MC - Multi Connect
PDF
(1.3 MB)
Venkon XL fan coils (FCU)
PDF
(10.5 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
CAD-Drawings
Fan Coil Venkon XL, Baugroesse 1 - 4, [Inch], PDF
PDF
(324 kB)
Fan Coil Venkon XL, Baugroesse 1 - 4, [mm], PDF
PDF
(327 kB)
Fan Coil Venkon XL, Baugroesse 1 - 4, [Inch], DWG
DWG
(772 kB)
Fan Coil Venkon XL, Baugroesse 1 - 4, [mm], DWG
DWG
(773 kB)
